Filter
Top Products
52
3
Basic Operations
2
Press the four-way controller
(3).
The Flash options screen appears.
3
Use the four-way controller (45) to choose a flash mode.
4
Press the 4 button.
The camera returns to the Fn menu screen.
5
Press the { button.
The camera is ready to take a picture.
1
Set the mode dial to H, I, =, q, or ..
2
Press the shutter release
button halfway.
The built-in flash pops up if necessary
and begins charging. When the flash is
fully charged, b appears in the LCD
panel and viewfinder. (p.17, p.20, p.22)
When the mode dial is set to e, b, c,
a or p, B and C appear gray and
cannot be selected.
Using Auto Discharge
B
,
C
(Automatic Flash Popup)
The flash is deactivated when A (Night Scene), K (Sunset),
D (Candlelight) or E (Museum) is selected in H (Scene) mode.
Switch between Auto discharge mode and Manual discharge mode (Flash ON)
by pressing the K button while the built-in flash is popped up. If Auto
discharge is set, E appears on the LCD panel.
Auto discharge
Auto discharge
Auto discharge
Flash Mode
Flash Mode
Flash Mode
OK
OK
OK
OK