Pentax K100D Digital Camera User Manual


 
198
6
Appendix
In rare cases, the camera may not operate correctly due to static
electricity. This can be remedied by taking the batteries out and putting
them back in again. When the mirror remains in the up position, take the
batteries out and put them back in again. Then, turn the power on. The
mirror will retract. After the procedure is done, if the camera operates
correctly, it does not require any repairs.
* Refer to p.11 of the “PENTAX PHOTO Browser 3/PENTAX PHOTO
Laboratory 3 Operating Manual” for details on connecting the camera to a PC.
Shake
Reduction does
not work
Shake Reduction
function is off
Turn on the Shake Reduction switch.
Shake Reduction
function is not set
properly
If a lens for which focal length information
cannot be acquired is used, set the [Focal
Length] on the [Shake Reduction] menu.
(p.49)
Shutter speed is
slowed when
panning or shooting
night scenes, etc.
Shake Reduction
function exceeds
correction range
Turn off the Shake Reduction function and
use a tripod.
Subject is too close
Move away from the subject, or turn off the
Shake Reduction function and use a tripod.
Problem Cause Remedy