Pentax Optio A10 Digital Camera User Manual


 
150
7
Settings
Formatting will delete all the data on the SD Memory Card if you are
using a card, and all the data in the built-in memory if there is no SD
Memory Card inserted.
1 Select [Format] on the [B Set-up] menu.
2 Press the four-way controller (5).
The Format screen appears.
3 Use the four-way controller (2) to
select [Format].
4 Press the OK button.
Formatting starts. When formatting is
completed, the camera is ready to take pictures.
Formatting an SD Memory Card or the Built-in
Memory
Do not remove the SD Memory Card while the card is being
formatted as this may damage the card and render it unusable.
SD Memory Cards formatted on a PC or device other than the
camera cannot be used. Be sure to format the card with the
camera.
Formatting will delete protected data too. Be careful.
If formatting was performed in Playback mode, the camera returns
to Playback mode after it was completed, then the [No image/sound]
message appears.
How to recall the [B Set-up] menu
Four-way
controller
MENU button
OK button
Rec. Mode
MENU
Exit
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
AWB
Auto
8M
MENU
Shutter
release
button
Format
Format
All data deleted
Cancel
OK
OK