Pentax Optio M20 Digital Camera User Manual


 
65
4
Taking Pictures
* The Green Mode settings are as shown below.
*1 Can be set to a (Flash Off)
*2 Can be set to g (10 sec. Self-timer) or Z (2 sec. Self-timer). (The
setting in a shooting mode other than Green Mode is available.)
*3 Can be set to q (Macro) and r (super macro)
If any other functions have been assigned to the Green button, the
camera does not switch to Green Mode. The assigned function is
displayed. (p.56)
In Green Mode, you cannot change the information displayed on
the LCD monitor by pressing the 4/W button.
You cannot use the [A Rec. Mode]
menu or Capture Mode Palette in
Green Mode. If you try to display the
[A Rec. Mode] menu or Capture Mode
Palette, - (key lock icon) and a
message appear.
If you switched to
Q
mode from Green
Mode, you cannot display the
[
H
Setting] menu by pressing the
3
button. If you try to display
the [
H
Setting] menu,
-
(key lock icon) and a message appear.
When the camera is turned off in the Green Mode, it turns on in the
Green Mode next time the power switch is pressed.
Flash Mode , (Auto)*1
Drive Mode 9 (Standard)*2
Focus Mode = (Standard)*3
Information Display Standard
Recorded Pixels
a
Quality Level D (Better)
White Balance F (Auto)
Focusing Area J (Multiple)
Sensitivity Auto
EV Compensation ±0.0
Digital Zoom O (On)
Instant Review 1 sec
Sharpness G (Standard)
Saturation G (Standard)
Contrast G (Standard)
38
38
38
Auto Picture
Auto Picture
Auto Picture
Green mode must
Green mode must
be canceled to use
be canceled to use
this function.
this function.
Green mode must
be canceled to use
this function.