Pentax M30 Digital Camera User Manual


 
3
Do not disassemble or modify the product. This can cause a fire or
electrical shock.
If the generation of smoke or strange odor from the product or other
abnormality occurs, immediately discontinue using and consult a PENTAX
Service Center. Continued use could cause a fire or electric shock.
Caution
Do not place heavy objects on the AC plug cord, allow heavy objects to
drop onto it or allow the AC plug cord to become damaged due to
excessive bending. If the AC plug cord becomes damaged, consult a
PENTAX Service Center.
Do not short or touch the output terminals of the product while it is still
plugged in.
Do not plug in the AC plug cord with wet hands. This can cause an
electrical shock.
Do not subject the product to strong impacts or allow it to drop onto a hard
surface. This can cause a malfunction.
To reduce the risk of hazards, use only CSA/UL Certified power supply
cord set, cord is Type SPT-2 or heavier, minimum NO.18 AWG copper,
one end with a molded-on male attachment plug cap (with a specified
NEMA configuration), and the other is provided with a molded-on female
connector body (with a specified IEC nonindustrial type configuration) or
the equivalent.
Take the Worldwide Service Network listing that is included in the package
with you when traveling. This will be useful if you experience problems
abroad.
When the camera has not been used for a long time, confirm that it is still
working properly, particularly prior to taking important pictures (such as at
a wedding or during traveling). Contents of the recording cannot be
guaranteed if recording, playback or transferring your data to a computer,
etc. is not possible due to a malfunction of your camera or recording media
(SD Memory Card), etc.
The lens on this camera is not interchangeable. The lens is not removable.
Do not clean the product with organic solvents such as thinner, alcohol or
benzene.
About the AC Adapter
Care to be Taken During Handling