Pentax Optio RZ18 Camcorder User Manual


 
119
3
Taking Pictures
Use this setting to specify whether or not an Instant Review is displayed
immediately after images are taken. The default setting is O (On).
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Instant
Review].
M
When the shutter release button is pressed halfway with [Shake
Reduction] set to [CCD-Shift] or [Dual].
l
When [Shake Reduction] is set to [Off]. (If the camera shake is likely to
occur, f is indicated when the shutter button is pressed halfway.)
When [Shake Reduction] is set to [Dual], camera shake is corrected
after shooting, and then the corrected image is saved.
When [Shake Reduction] is set to [CCD-Shift], CCD shifting sound
may occur during shooting with C (Burst Shooting(H)). This is not
malfunction.
In the following situations, [Shake Reduction] cannot be set to [Dual]
(only [CCD-Shift] or [Off] can be selected in the pull-down menu.). If
[Shake Reduction] is set to [Dual] beforehand, setting automatically
changes to [CCD-Shift].
- When C (Movie), S (Fireworks), N (Frame Composite), X
(Digital Wide) or F (Digital Panorama) mode is selected as the
shooting mode
- When g (Self-timer), j (Continuous Shooting), A (Burst
Shooting(L)), B (Burst Shooting(M)) or C (Burst Shooting(H)) is
selected as the drive mode
- When the flash discharges
- When the shutter speed is slower than 1/4 sec.
- When the sensitivity is set to 1600 or higher
- During Voice Recording
Setting the Instant Review