Filter
Top Products
224
8
Connecting to a Computer
Transferring Images Using an Eye-Fi
Card
You can transfer images to your computer automatically when a built-in
wireless LAN memory card (Eye-Fi card) is inserted in the camera.
1
Specify the wireless LAN access point and transfer
destination on the Eye-Fi card.
For details on how to set up the card, refer to the operating manual
supplied with the Eye-Fi card.
2
Turn the camera off.
3
Insert the Eye-Fi card into the camera.
4
Turn the camera on.
5
Select O (On) for [Eye-Fi] on the [W Setting] menu.
The images are transferred automatically. For details on how to set up
the camera, refer to “Setting Eye-Fi Communication” (p.201).
One of the following icons will appear on the display.
Transferring. When [Eye-Fi] is set to O, and either transferring images
or searching for the access point.
Waiting for transferring. When [Eye-Fi] is set to O, and not transferring.
Transferring is not allowed. When [Eye-Fi] is set to P.
Version error. When the version of the Eye-Fi card is out of date, or
when the Eye-Fi card is write-protected.
• Endless Memory Mode is not supported.
• Update the Eye-Fi card firmware as necessary before using the card.