Pentax WG-10 Camcorder User Manual


 
123
3
Taking Pictures
Set the sensitivity range when the sensitivity is set to AUTO.
The sensitivity can be set to 80-100, 80-200, 80-400, 80-800, and 80-1600.
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [AUTO ISO
Range].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller
(23) to select the sensitivity
adjustment range.
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture mode.
When the sensitivity is set to 3200 or 6400, the number of recorded
pixels is fixed at f (2592×1944)/ (2592×1464).
When set to
c
(Digital SR), 9 (Green), C (Movie), or
(Underwater Movie) mode, only [AUTO] is available.
When set to S (Fireworks) mode, the sensitivity is fixed at 80.
When the shooting mode is set to (Report), the AUTO is fixed at
80-6400. Other sensitivities can also be selected.
Saving the Sensitivity setting 1p.149
Setting AUTO ISO Range
When the Sensitivity is set to 80 or 100 and Highlight Correction is set to
O (On), the setting changes to 160. The setting returns when Highlight
Correction is set to P (Off).
Rec. Mode
2/4
MENU
Cancel
OK
OK
ISO80-800
ISO80-1600
ISO80-400
ISO80-200
ISO80-100
AUTO
Pixel Track SR
Sensitivity
AUTO ISO Range
Movie
EV Compensation
D-Range Setting