Filter
Top Products
Subject to technical alterations, as well as to changes of the design and the colour
Model Pro 120 Pro 250
Installation 230 mm + projector height 335 mm + projector height
Projector mounting
at the projektor bottom, with fixing screws (M3/M4/M5/M6),
drill-holes between 138 and 378 mm diameter
Lifting range up to 120 cm up to 250 cm
Weight of lift ca. 32 kg (w/o projector) ca. 38 kg (w/o projector)
Projector size max. 45 x 65 x 20 cm
Projector weight max. 30 kg max. 20 kg
Voltage 230 V / 50 Hz
Mounting frame 690 x 490 mm
Cutout of ceiling 740 x 540 mm
Ceiling plate adjustable steel plate
Colour metallic silver grey (RAL 9006)
ceiling plate white (RAL 9003)
22
CEILING LIFTS
KINDERMANN ceiling lift Pro 120 / Pro 250
Professional ceiling lift with low noise movements
Lifting range up to 340 cm
For projectors of up to 30 kg weight
Super flat universal projector holder, tiltable
Maintenance-free Somfy motor
Special protection of all cables
Safety switch
Press the button and the projector is lowered and ready for use. The exact
position of the unit can be pre-selected.
A safety switch stops the lift on its way down when hitting an obstacle.
For a cutout of the ceiling of min. 74 x 54 cm. Easy mounting.
An optional side panelling (No. 7465-10) is available for mounting the
lift directly on the ceiling.
A special device for protecting all projector connections and a 4-pin
cable are supplied with each unit.
The lift can be operated by up/down switch, remote or conference
control.
Note:
Lifts with lifting range up to 340 cm on demand.
KINDERMANN ceiling lift Pro 120
KINDERMANN ceiling lift Pro 250
No. 7465
No. 7465-3
Ceiling lifts allow you to install your
data/video projector in a false ceiling,
e.g. of a conference or lecture room. If
not in use the projector is hidden behind
the panelling of the ceiling and thus
protected against theft.
Accessories for ceiling lift Pro 120 / Pro 250
Metal panelling
for visible mounting on the ceiling,
4 parts, height 40 cm, white colour
T-profile
for holding the cutout panelling,
note different size of cutout
752x552 mm
Special holder
for mounting the projector in an upright
position (e.g. Sanyo EF/XF 60),
note different size of cutout 800x600 mm
T-profile
for special holder No. 7465-30,
note different size of cutout 812x612 mm
Fan relais
Controls the fan when the ceiling lift is up
and the safety switch has cut off the power;
up to 10 additional minutes of fan
operation; inputs 230 VAC and safety
switch; output 230 VAC for power supply
of the projector; for Wieland socket system
GST 18.
No. 7465-10
No. 7465-20
No. 7465-30
No. 7465-40
No. 7465-15
ceiling lift Pro 120
ceiling lift Pro 250
projector dim. max.
450x650x200 mm
dim. X= projector height + min. 50 mm dim. in mm
ceiling lift Pro 120
lifted = min. 180 mm
unlifted = max. 1380 mm
ceiling lift Pro 250
lifted = min. 285 mm
unlifted = max. 2785 mm
Technical data
Certified safety:
Durability proved by long-term testing
Endurance test with double load
Free of electro-magnetic interferences
Corrosion resistant
Quality
made
in
Germany
by KINDERMANN