Subject to technical alterations, as well as to changes of the design and the colour
INSTALLATION ACCESSORIES
35
VGA switchers
All selectors offered below transfer the VGA signal from 2 up to
8 connected computers to a monitor or projector.
2 inputs / 1 output (all HD15 f)
2 select buttons
Auto skip, for skipping non-active inputs
4 status LEDs
Frequency 250 MHz
Supports 1920x1440 pixels and DDC1, DDC2, DDC2B, DDC2B+, DDC2AB
Metal casing 128x75x45 mm
Power supply DC 9V, 300mA
Switches automatically to second input in case of a loss of the original input
signal.
2 VGA inputs / 2 outputs (HD15 f)
2 Audio inputs / 1 output (3.5 mm jack / f)
Loop input = input 1
ID-Bit control
Frequency VGA 300 MHz, Audio 100 kHz
Control: automatic or via contact switch
Metal casing 120x75x25 mm
Power supply 12 V DC, 50 mA
VGA Matrix 2x2
No. 5816-5
The VGA Matrix connects 2 computers to 2 displays or projectors and also functions
as signal amplifier.
Each output shows either input 1, input 2 or no signal
2 selectable VGA inputs / 2 outputs (all HD15 f)
2 select buttons
4 status LEDs
Frequency 250 MHz
Supports 1920x1440 pixels @ 60 Hz
Metal casing 130x75x42 mm
Power supply DC 7.5 V, 800 mA
VGA share Basic 2 : 1
No. 5816-11
VGA share Basic 4 : 1
No. 5816-12
similar to 5816-11 but with
4 inputs / 1 output (all HD15 f)
4 select buttons
8 status LEDs
VGA share Basic 8 : 1
No. 5816-3
VGA Audio Share Pro 2 : 1 - automatic
No. 5816-4
VGA Audio Share Pro 3 : 2
No. 5816-6
High-quality switcher for VGA and symmetric audio signals. Transforms 3 inputs
into 2 identical outputs.
3 VGA inputs / 2 outputs (HD 15 f)
3 Stereo audio inputs / 2 outputs (5-pin clamp connection)
Frequency VGA 450 MHz, Audio > 100 kHz
Control: 3 select buttons, relais inputs
Metal casing 220x180x45 mm
Power supply 12 V DC, 146 mA
Optional 19" rack adapter
Presentation switcher N
Presentation switcher RC
The „central control unit“ for the smaller or medium-sized conference rooms
Combines 4 switchers in a 2HE 19" casing
4 : 1 switcher for VGA with Audio, Video with Audio, S-Video with Audio
All Audio connections symmetric with clamps
XLR microphone connection can be adapted to dynamic or condensor microphones
Talk-over function for microphone and volume control for Audio source
Integrated Audio amplifier 2 x 5 W RMS - for smaller conference rooms
a separate amplifier is not necessary
Inputs:
4 VGA (HD15 f), 4 S-Video (4 pin-Mini-Din / f), 4 Video (BNC),
12 Audio (symmetric), 1 microphone (XLR)
Outputs:
1 VGA (HD 15 f), 1 S-Video (4 pin-Mini-Din / f), 1 Video (BNC),
3 Audio (symmetric), 1 Master Audio (symmetric)
Parallel/additional VGA output via Cat5/Twisted Pair - for transmission
of VGA signals via Cat5-UTP cable up to 100 m (optional receiver
module required)
Operation:
Via buttons on unit, RS 232-/485-/network interface or IR remote control
Control for Audio and microphone level
Frequency 350 MHz (VGA), S-Video (385 MHz), Video / SDI (650 MHz)
Additional functions of presentation switcher RC:
Integrated Room Controller for controlling the projector, other signal
sources, screens, lifts or technical devices in the house e.g. light, shades etc.
2 bi-direct RS 232 interfaces
3 infrared (for each 2 diodes)
4 relais
1 Ethernet port
Easy programming via Windows-based software resp. integrated
IR learning module
No. 7485-2
No. 7485-3
No. 7481-10
CAT5-VGA receiver for 7485-2/-3
1 input / 1 output (1 x RJ 45 / f, HD15 / f)
Frequency 15 MHz @ - 3 dB
Control for level (gain) & EQ (Peaking)
Metal casing 60 x 65 x 25 mm
Power supply DC 12 V, 30mA
8 inputs (HD15 m) / 1 output (HD 15 f)
IR remote control for selection of sources
Buttons on the unit: up/down for successive selection and blank
16 status LEDs
Supports 2048x1536 pixels @ 60 Hz and DDC, DDC2, DDC2B
Plastic casing 170x190x45 mm
Power supply AC9V, 4.5 W and
1.2 m VGA cable (m / f)