CONFERENCE CONTROLS
Subject to technical alterations, as well as to changes of the design and the colour
26
KINDERMANN PIXIE Pro
Conference controls for:
Projectors, displays, etc.
Electronic devices, e.g. DVD player
Volume control, e.g. amplifier
Room technology, e.g. screens, ceiling
lifts, shades
PIXIE Pro conference controls
The PIXIE Pro control systems are intelligent
gadgets for conference, lecture rooms and
classrooms where data/video projectors,
displays, volume controls or room technology
are permanently installed and often used by
different persons.
Operating all the devices with their various
functions is really easy. The user can control
everything from a centre point by pressing the
buttons of a single unit and doesn’t need
several remote controls. Thus operation errors
can be avoided.
The PIXIE Pro System Control and PIXIE Pro
NRC can be freely configurated to control a
data/video projector, a display, a DVD player,
Audio systems, screens, ceiling lifts, room lights
and shades.
The control functions either via RS 232, relais
or infrared commands.
The PIXIE Pro conference controls are modular
systems and can be adapted to the individual
requirements, resp. expanded.
PIXIE Pro System Control
PIXIE Pro NRC Controls Pucks
Password protection
optional blocking of
unauthorized use
Navigation in the
on-screen menu
DVD player, projector
(blind cover optional)
KINDERMANN PIXIE Pro System Control
Volume control
projector or amplifier
(blind cover possible)
Light sensor controls
background illumination
depending on the room
light
Power on/off
e.g. as general control
of all connected devices
Special functions
e.g. mute, freeze, format,
PIP etc.
Operating buttons for disc
drive for playing DVD, VCR
(blind cover possible)
Screen, lift, up/down
(blind cover optional)
Select source
1–8 sources
(blind cover optional)
AUX functions up/down
(blind cover optional)
Additional IR transmitter
Cable IR transmitter No. 5698-10
For transmitting the IR signal and for the
power supply
Extension cord No. 5698-11
Optional cover of elegant design. For covering
the PIXIE Pro electronic part, i.e. the unit without
plastic casing, when installed in a desk or a
wall.
Stainless steel front cover No. 5699-10
Dim. Board: 181 mm x 107 mm x 30 mm
Desktop casing: 210 mm x 115 mm x 35 mm
Power supply: Stabilized unit
100–240 VAC / 6 VDC, 0.8 A
Output: IR transmitter module
(1 module supplied)
Recommended connection cable 3-pin, 0.25 – 0.5 mm
2
, protected
between IR transmitter/PIXIE
Pro (No. 5698-11) optional
Possible installations: Desk mounting, wall mounting or mounting in cable
channel. Supplied with desktop casing
No. 5699
KINDERMANN PIXIE
Pro System Control
The PIXIE Pro can learn the commands of the
original remote controls of the various sources
and safely transmit the IR signals via the installed
wiring to the units.
It can also control electrical screens or ceiling
lifts via the IR remote.
Even more complex tasks can be carried out
after programming the unit correspondingly.
The operating panel can be individually
adapted and labelled to the user’s require-
ments.
The KINDERMANN PIXIE Pro System Control
can be used as a desktop unit or for wall
installation. It can also be inserted in a cable
channel.
Pixie Pro System Control as stand alone unit
PIXIE Pro Network Room Control