Filter
Top Products
8 EN
Select a special effect
1 In viewnder mode, tap to show the
system setting menu.
2 Tap [Effects] to enter special effect setting.
3 Tap / to select a special effect you
like.
4 Tap [OK] to conrm the setting.
Charge the built-in battery
Note
•
The USB connector of the camcorder is primarily
intended for charging and mass storage purposes.
• You can also connect the USB connector of the
camcorder to another device (for example, a TV, DVD/
Blu-ray player or Home cinema set) for media play. In
this case, make sure that the device supports the H.264
le format.
• Not all devices that support H.264 le format can
play media les in the camcorder through direct USB
connection.
1 Press at the bottom of the camcorder
to eject the USB connector.
PRESS
2 Connect the USB connector to a USB
socket on a PC.
» The status indicator on the shutter
button starts ashing in orange.
3 Wait until the status indicator stops
ashing and turns to green steadily.
» The built-in battery is fully charged.
Tip
•
The camcorder is fully charged for rst-time use.
• It takes about 3.5 hours to fully charge the built-in
battery via the PC.
You can also charge the camcorder via a USB
adaptor (not supplied) connected to mains
power. The charge time is about 2 hours.
UK
EUR
UK
EUR