Filter
Top Products
- 2 -
Charge the Battery Before 1
st
Use
This device has a built-in rechargeable battery. It comes per-charged from the
factory, but for optimal performance during your first use, it is recommended to
charge the battery fully before using the PhotoFrame for the first time. To charge
the battery, connect the included USB cable to the device and to a USB port on
your computer. If you do not have a computer, you will need to use a separate
USB/AC charger, commonly found at cell-phone stores. While charging, a battery
symbol will appear on-screen. When the battery image is static and full, the charge
is complete. It may take up to 3 hours for a complete charge.
Power On/Power Off
To turn ON the device, press and hold down the MENU (4) button for 3 seconds.
To turn OFF the Device either:
1. Press and hold down the MENU (4) button for 3 seconds.
Or
2. Briefly press the MENU (4) button to display the PhotoFrame’s menu. Press the
“NEXT”(3) (“ ”) button repeatedly until the "Power Off" menu item is highlighted.
Press the MENU (4) button again to confirm.
Transferring Photos from a Computer to the PhotoFrame
Note: Your Key Chain PhotoFrame comes with 8MB of internal memory, which
can hold up to a 100 pictures depending on their size.
How to Connect the PhotoFrame to your Computer:
1) Connect the PhotoFrame to a USB port on your computer using the included
USB cable. You can add up to 100 pictures depending upon file size
2) Briefly press the MENU (4) button on the PhotoFrame to display the menu.
3) Select “USB Connect”from the list of menu items. Pressthe MENU (4) button
to confirm. A submenu will appear with a choice of “yes”or “no.”
① Keychain attachment.
② Previous –go to the previous picture or menu item.
③ Next –goto the next picture or menu item.
④ Menu–displays the main menu, or confirms your menu item selection.
⑤ LCD Display –displays photos and menus.
⑥ USB port –connect to a computer using the provided USB cable.
⑦ Reset –resets the unit when it freezes or stops responding.