Filter
Top Products
Connections
34 Planar UltraRes User Manual
Setting Up UltraRes Using Single Inputs
Instead of having one central device into which you can connect and define your
source inputs, single source setup requires connecting from a single-headed source
to the display. For example, connecting one input directly from a Blu-ray player into
the 84” display.
The example below uses the following:
• PC with 4K at 24/25/30HZ output
• 4K Blu-ray player, such as Sony BDP-S790
The following formats are supported for single inputs:
• (1x) DisplayPort or HDMI/4K@ 24/25/30Hz
• PC with DisplayPort 1.1a or 1.2 output
• 4K Blu-ray player (for example, Sony BDP-S790)
There are two preferred ways in which you can select individual inputs. They are
described on the following pages.