Filter
Top Products
34
Troubleshooting
34
Troubleshooting
Status Solution
Camera does not
turn on
Make sure the batteries are fresh and installed correctly.
Camera does not turn
o
Camera buttons and
controls do not
function
LCD is too dark. Adjust the LCD Brightness setting
Pictures remaining
number does not
decrease after taking
a
picture
Continue taking pictures. The camera is operating normally.
(The camera estimates the number of pictures remaining after each
picture is taken, based on picture size and content.)
Flash does not re Check the ash setting, and change as needed .
NOTE: The ash does not re in all modes.
Memory card is
almost
or entirely
full
Transfer the pictures to the computer .
Delete pictures from the card or insert a new card.
Memory card not
recognized or camera
freezes with card
Card may be corrupted. Format the card in the camera.
Use another memory card. Only SD or SDHC Cards are supported.
Battery life is short Make sure the correct battery type is installed .
Wipe the battery’s contacts with a clean, dry cloth before
inserting it in the camera.
Insert a new/charged battery .
Limit the time you review pictures/videos on the camera LCD.