Filter
Top Products
43
S-MODE – SHUTTER PRIORITY
42
S-MODE – SHUTTER PRIORITY
2. Press the function button and
turn the control dial until S
appears in the data panel.
3. Turn the control dial to select
the shutter speed.
• The number 60, or 125, displayed in the
data panel stands for 1/60th or 1/125th of a
second.
• The seconds indicator appears in the
viewfinder and data panel if the shutter
speed is one second or longer.
In S-mode, you select the shutter speed and the camera
automatically sets the aperture required for proper exposure. Use
S-mode when you want to control the blur caused by subject
movement.
1. Press the flash-mode button
to pop-up the built-in flash.
• will appear in the data panel.
2. Turn the control dial to select
any shutter speed up to
1/125th of a second.
• The camera automatically sets the aperture
for the selected shutter speed.
S-Mode Flash
When the built-in flash is up or an attached accessory flash is on, it
will fire each time a picture is taken. Flash exposure is controlled by
the camera’s TTL automatic flash metering system.
Push the built-in flash down or turn the accessory
flash off.
• will be displayed in the data panel.
Cancelling the Flash
1. Turn the function dial to .
If the aperture display in the data panel blinks, the required
setting is outside the aperture range of the lens. Turn the control
dial until the blinking stops.
2154-E (US).qed 3/4/98 2:41 PM Page 42