Filter
Top Products
26
Development Time To move from Picture Select to Development Time, press the
Menu button. The display shows the number of seconds set
for development time. To increase the development time,
press the Up button. To decrease the development time,
press the Down button.
Reset Counts To move from Development Time to Reset Counts, press the
Menu button. To reset the Counts display (described earlier)
to all zeros, press the Up or Down button.
Language To move from Reset Counts to Language, press the Menu
button. The display shows the language set for display mes-
sages. Press the Up or Down buttons to select the language
you want the camera to display.
Auto Shutoff To move from Language to Auto Shutoff, press the Menu
button. The display shows the current setting for Auto Shutoff
time. You can program the camera to shut off automatically
when it has been idle for the displayed amount of time. When
Auto Shutoff is set to 10 minutes, the camera shuts off if it
has not been used for 10 minutes. When Auto Shutoff is set
to 20 minutes, the camera shuts off if it has not been used for
20 minutes. When it is set to OFF, the camera remains on
until it is unplugged.
To move from Auto Shutoff out of the menu system, press the
Menu button. The display changes from the cameras menus
to the Ready message. At any time while using the camera
menus, you can press the Exit button to leave the menus.
Exit