Filter
Top Products
28
Picture Fault Cause Corrective Action
Small, white specks,
pink lines, streaks or
blotches
Pulling the film
through the rollers
too fast.
Pull the film using a
smooth, even, mod-
erate pull speed.
Muddy-looking print Development time not
long enough.
Develop film for time
recommended in film
instruction sheet.
Broad streak or mark
across the picture
Hesitating while pull-
ing the film from the
camera.
Pull the film tab
straight out in one
motion, without hesi-
tation.
Very light or no image Film fogged or ex-
tremely overexposed.
Do not remove the
safety cover prior to
loading the film.
Do not open the
camera and remove
the film pack while
taking a picture.