Filter
Top Products
8
Polaroid PhotoMAX PDC 1075 Digital Camera User Guide
www.polaroid-digital.com
3. Place the camera into Docking Station and power on the camera. For
further detail please refers to Using Docking Station on page 7.
4. The battery begins charging and the Status LED blinks.
5. It takes up to 2 to 3 hours to fully charge the battery each time.
6. When the Status LED stops blinking, it indicates the Li-polymer
rechargeable battery is fully charged.
Please fully charge the battery for up to 10 hours before you use the
camera for the rst time after purchase. The internal battery should
last for the life of the camera, but as is the case with all rechargeable
batteries the actual charge held may decline with use. Should it
ever become necessary to replace the internal battery, please visit
www.polaroid-digital.com/support/ for service instructions.
• Turning the Camera On and Off
Fully press and hold the Power button until the
status LED turns green and the camera is on. Press
and hold the Power button again, the camera will
be off.
Power button
Status LED
• Checking the Battery Level
Check the battery power level before taking pictures.
1. Turn the camera on.
2. Check the power level status that appears on the
camera LCD screen.
Battery has adequate power.
Only half of the battery power left.
Battery needs to be recharged.
PDC 1075 US UM BF.indd 4/30/03, 4:20 PM8