Polaroid Polaroid Wireless Surveillance Camera Security Camera User Manual


 
34 35
IP200 Manual
3.4 Wireless LAN Settings
Figure 6.1
Figure 6.2
Note: Follow the instruction numbers as they appear in this gure.
1. You must have a wireless router.
2. Your wireless antenna must be installed on camera.
3. If your router is encrypted, you must ascertain and keep the key code.
4. To login in to a camera, click on Network, then go to Wireless LAN settings to
set-up and then Scan. Scan two times, the WAN LIST will appear and you may
choose the camera you wish to use.
5. If there is no encryption, simply click Submit.
6. If there is encryption, input the share key and click on Submit.
7. Wait about 30 seconds, until the camera reboots, and then unplug the network
cable. The camera will now transmit wirelessly.
Figure 5.9
To nd the DNS Server, follow similar instructions above as you did for
Gateway. If your router supports DHCP function, choose “Obtain IP from DHCP
Server” to get dynamic IP.
Figure 6.0
Http Port. In most cases, you may leave the value that comes up as is. If it does
not work however, you may change the number to another value (i.e. 85)
Polaroid Settings Polaroid Settings