Filter
Top Products
6 7
Using Your Polaroid ZIP Printer
Charging & Power:
Charge battery fully before first use. Average
charging time from empty to full is approximately
1 hour and 30 minutes.
1. Connect smaller end of included USB cable to
Micro USB Port (4).
2. Connect other end to computer, or use
adapter (not included) to connect to wall
outlet.
3. Charging Indicator (2) will remain red while
charging, and turn green when battery is fully
charged.
4. To power on, press and hold Power Button (1)
for 4-5 seconds.
5. To power off, press and hold Power Button (1)
for 2-3 seconds.
Inserting Photo Paper:
1. Ensure printer is powered off before inserting
paper.
2. On Top Cover (6), locate arrow pointing
towards Polaroid logo.
3. Place thumbs on cover while holding onto
printer underside with other fingers.
4. Push cover gently in direction of arrow. Cover
will slide forward just a bit.
5. Lift cover to remove from main printer unit.
Set aside on non-abrasive surface.
6. Unpack included photo paper, and insert with
blue Smart Sheet facing down.
7. Replace Top Cover (6) by aligning
with unit and sliding backward
in opposite direction of arrow.
Bluetooth Pairing for Android:
1. Press and hold Power Button (1) for 4-5
seconds to power on printer.
2. In printing menu on your Android device, find
“Bluetooth Device List”.
3. When “Polaroid ZIP Printer” appears, tap it to
select it.
4. Devices are now paired, and your printer is
added to “Paired Device List”. This enables
Android users to share images directly via
Bluetooth without need to use printer app.
Bluetooth Pairing for iOS:
1. Press and hold Power Button (1) for 4-5
seconds to power on printer.
2. Set your iOS device to Bluetooth scan or in
discoverable mode.
3. When “Polaroid Mobile Printer” appears, tap
it to select it.