8
stays latched. Do not force the card. If it cannot be inserted easily, check the card’s position
according to the position mark on the camera.
Push to release the inserted card if you wish to remove or replace the
card.
Turn your camcorder OFF before inserting or removing the SD Card.
Failing to power off the camera may cause permanent damage to the
card or corrupt the data on the card.
- Note that the SD Card has a LOCK switch on the side. Set the switch
to un-LOCK position to be able to store videos or still pictures on the SD
memory card.
2.4 Power on/off
In power-off state, press and hold the power key to power on the camera.
In power-on state, press the power key to power off the camera.
If the camcorder is idle for 1 minute(default), the camcorder will power off automatically.
In power-on state, when battery level is very low, the camcorder will turn off after several
seconds. You must charge or replace the battery with a freshly charged battery in order to
continue shooting.