ProMaster MyMuvi Movie Machine Camcorder User Manual


 
9
2.5 Setup menu
In power-off state, press and hold Shutter/OK key then press the POWER key. When the
setup menu is displayed you can release the Shutter/OK key and press the direction keys to
move the cursor or adjust the menu value. Press the Shutter/OK key to confirm your menu
selection. Press the Delete key to exit the menu. In the setup mode you can set the
Language, Date & Time, TV out mode, Power frequency and view the Firmware version.
2.6 Changing mode
At power on, the camcorder will default to the video record mode. Press the MODE key to
change between video recording, still photo mode or playback.
2.7 Video recording mode
In video recording mode, press Shutter/OK key to start recording, While recording, press the
Shutter/OK key again to stop recording.
In the recoding standby mode, press the Left or Right navigation key to change the video
size between HD(1280x720), D1(720x480), VGA(640x480); Press the up key or down key
to zoom in or zoom out the image.
2.8 Still photo mode
In Still photo mode pressing the Shutter/OK key will capture the photo.