Filter
Top Products
63
Trouble Checks
Tape Stops During
Rewind or Fast
Forward
Camcorder Remains
in Play Pause
Poor Picture Quality
During Recording
Viewfinder Displays Are
Out of Focus
Poor Auto-Focus
Operation
Poor Picture Quality
During Playback
Recorded Audio is Too
Low
• The tape counter’s memory-stop feature may be
turned on. When an “M” appears behind the tape-
counter display, the camcorder will stop rewinding or
fast-forwarding when the counter reads “0000M”.
Press the REW (rewind) or F.FWD (fast forward)
button again to continue, or press DISPLAY to turn
off memory stop.
• Press REC/PAUSE to return to normal playback.
• There is insufficient light. Add more light.
• Use the color enhancement light to add more light.
Details are on pages 48-49.
• Try adjusting the eyepiece focus control. Details are
on page 22.
• Lens may be smudged and image appears unfocused.
• Viewfinder eyepiece focus or BRIGHT control may
be adjusted incorrectly. Details are on pages 22-23.
• Tape was recorded on a different camcorder or VCR.
If the picture contains black-and-white streaks, press
one of the TRACKING buttons to correct.
• Camcorder only has one speed (SP). If the tape was
recorded on a different VCR at a different speed, it
cannot be played back in this camcorder.
• Subject may have been too far from the camcorder.
Trouble Checks and Adjustments
(continued on next page)