Filter
Top Products
27
Date and Time Display
The time and date (or date only) can be recorded on your tape. Whenever one of the
displays appears in the viewfinder, it will be recorded.
The camcorder has an auto-date feature that will record the date only for approximately
ten seconds when you begin recording.
Charging the Camcorder’s Built-in Clock Battery
The camcorder has a built-in rechargeable clock battery.
This battery must be charged approximately every two months.
Recording Date and Time (or Date) on Your Tape
11/18/95
AUTO
11/18/95
12:00AM
1/1/95
Date and Time
Date Only
No Display
Auto Date – Date
Automatically Recorded
for Ten Seconds at
Beginning of Recording
Repeatedly
Press DATE/
TIME
1. Attach a power supply (adapter/
charger or charged battery) to the
camcorder.
2. Make sure POWER is in OFF.
3. Leave the power supply attached at
least 24 hours.
Cautions: If this battery is not charged
every two months, it will over-discharge
and shorten its useful life.
Do not attempt to replace this battery.
Take the camcorder to an authorized
Servicenter.