Filter
Top Products
25
Recording
T30
30MIN
SP
30MIN
29MIN
3MIN
2MIN
(Flashing)
1MIN
(Flashing)
0MIN
(Flashing)
TAPE END
5. Press the MENU dial to display the
TAPE LENGTH menu.
T20
T30
T40
EXIT
TAPE LENGTH
6. Rotate the MENU dial to highlight the
type of tape you are using.
• Select T20 for a tape with 20
minutes or less recording time
in SP.
Time-Remaining Display (continued)
• Select T30 for a tape with 30
minutes recording time in SP.
• Select T40 for a tape with 40
minutes recording time in SP.
7. Press the MENU dial twice to select
the speed and remove the MENU.
The time-remaining display starts
flashing when the remaining tape
time reaches two minutes.
TAPE END appears when the tape reaches
its end during recording or a cassette is
loaded thats tape is already at its end.
Time-Remaining Display
in Viewfinder
Tape Length
Indicator
Tape Speed
Indicator