RCA CC634 Camcorder User Manual


 
33
Recording
BATT. RELEASE
B
C
AUDIO
RF
DC OUT
VIDEO
L
E
N
S
C
O
V
E
R
DATE/TIME/CHAR––SET
T20•30•40
TRACKING
UNTER R/M
W.BAL.
PLAY/PAUSE
STOP
FF
+
REW
+
CAMERA
VCR
POWER
OFF
Tape Time-Remaining Display
The approximate time remaining on the tape in the camcorder is automatically
displayed in the viewfinder. The SP•SLP/T20•30•40 switch must be set for the correct
recording speed and tape length before the camcorder can correctly calculate time
remaining.
SP•SLP/T20•30•40 Switch
30MIN T30 SP
30MIN
29MIN
3MIN
2MIN
(Flashing)
1MIN
(Flashing)
0MIN
(Flashing)
TAPE END
Time Counter With
Memory Stop Turned On
Before recording, repeatedly press the
SP•SLP/T20•30•40 switch to select the
recording speed and length of tape you
are using.
Select T20 SP if you are using a tape
with 20 minutes or less recording time
and want to record in SP speed.
Select T20 SLP if you are using a tape
with 20 minutes or less recording time
and want to record in SLP speed.
Select T30 SP if you are using a tape
with 30 minutes recording time and
want to record in SP speed.
Select T30 SLP if you are using a tape
with 30 minutes recording time and
want to record in SLP speed.
Select T40 SP if you are using a tape
with 40 minutes recording time and
want to record in SP speed.
Select T40 SLP if you are using a tape
with 40 minutes recording time and
want to record in SLP speed.
Notes: The time-remaining indicator will
start flashing when the remaining tape time
reaches two minutes.
TAPE END appears when the tape reaches its
end during recording or a cassette is loaded
whose tape is already at its end.
Set the Recording Speed and Tape Length