Filter
Top Products
13
Figure 16 – Thumbnails Icon
Figure 17 – Thumbnails View
Pressing the trash can button while on an
image will bring up a text box asking you if
you are sure you want to delete the image. If
you want to delete the image, highlight the
check mark , and press select. If you do
not want to delete the image, highlight the
, and press select.
Entering the Secondary Settings Screen
While in the Primary Settings Screen, use
the arrow keys to highlight the menu icon
and press select .
Figure 18 – Secondary Settings Screen
There are three setting categories to choose
from
(Figure 18)
while in the secondary set-
tings screen; camera, playback and tools.
Use the right and left arrow keys to switch
from one category to the next. The selected
category will be highlighted with a bright silver
background. Once the desired category is
reached, press select .
You will notice the up and down arrows on the
screen switch from gray to red. The red ar-
rows indicate you can now scroll through the
different settings. Use the up and down arrows
to switch between settings. Once on a setting,
use the right and left arrows to turn a setting
on or off or adjust to the required level. Press-
ing back at any point will bring you back to
the primary settings screen and pressing it
again will return you to the live screen.
Transferring Images To
A Computer
Figure 19 – Image Transfer
Using the Camera and Scanner Wizard
to Transfer Images to a Computer
1. Use the USB cable to connect the
microEXPLORER inspection camera to
the computer as shown in
Figure 19
.
2. Place the small side of the USB cable
into the mini USB port in the micro-
EXPLORER inspection camera
(Figure
7)
, and the larger end into an open USB
port in your computer.
3. Turn the microEXPLORER inspection
camera’s power ON.
4. A splash screen saying “USB Connected”
will appear on the microEXPLORER in-
spection camera’s screen.
5. The following screen will be displayed
on your computer. Select “Copy pictures
to a folder on my computer” and click
OK.
microEXPLORER
™
Digital Inspection Camera
Ridge Tool Company
Tools
PlaybackCamera
Setting
Categories
Setting