- 8 -
The Camera Modes
Preview Mode
This is the default mode for this camera, from which you can compose and take your photos with auto flash
light. This mode also enables you to change the camera’s resolution selection.
Taking Photos
You can frame your shot precisely by using the color LCD monitor or the viewfinder
Hold the dual hand grips steady and press the shutter button to take photos.
Resolution Selection
Press the RESOLUTION button once and the camera will give you an option to change resolution.
Press the RESOLUTION button again within 3 seconds to confirm your resolution selection. If you do not
want to change the resolution wait 3 seconds without hitting any buttons. ★=QVGA RESOLUTION; ★★=
VGA RESOLUTION.
Flash
This camera comes equipped with a built-in flash, it will automatically turn on when necessary. There are no
buttons to press to setup the flash.
Note:
The term VGA, (Video Graphics Array), refers to a photo taken with a resolution of 640×480 pixels. VGA
Mode allows you take 24 photos with the camera memory. QVGA, (Quarter VGA), refers to a photo taken
with a resolution of 320 x 240 pixels. QVGA Mode allows you take 93 photos with the camera memory.
Playback Mode
Formatted