Filter
Top Products
P. SD/MMC card Socket
Q. Lock Button
R. Switch Button
S. Battery Box
Section Two - Install Battery
1. Open the battery door.
2. Please place two AAA batteries according to the pole directions for batteries on
the battery box.
3. Close the battery box cover.
Note:
When you use the USB cable to connect the camera with a computer, it is
unnecessary to use the batteries because the camera use the power provided by
the computer through the USB interface.
Warning
1. Don’t open the battery box at will, because the power cut will cause the photos
lost in the camera.
2. If you don’t use the camera for a long time, please take out of the batteries for fear
of the discharging or corrosion of the batteries.
3. Please don’t put the battery into fire for fear of explosion
Automatically enter the energy saving status
If the camera is not used in 30s, the camera will auto enter the energy saving status.
IMPORTANT NOTE: TO ACHIEVE THE BEST CLARITY, MAKE CERTAIN THAT
THE DISTANCE BETWEEN THE CAMERA AND THE SUBJECT
IS “5” FEET.
68379 Software Installation
IMPORTANT: Before attempting to install the software, make sure that you do
not have the camera or the USB cable attached to your computer. This will
affect the install process and will cause your installation to fail. Do not
connect the cable to the computer until the entire installation process of both
PhoTags Express and the Camera Driver has been completed. We suggest