Filter
Top Products
19
2. Press FLASH/SET or . The icon will appear on the LCD screen. This means the flash function has
been " "Always On" (manual flash).
3. Press FLASH/SET or
repeatedly. Select the icon shown on the LCD screen. This will activate the
automatic flash.
4. Press FLASH/SET or
until the flash icon disappears. This will turn off the flash function.
NOTE: When the flash is set to either” Always On” or “Automatic” the flash indicator light will turn GREEN.
When you take a photo the flash indicator light will turn RED. You must wait until the light turns back to GREEN
before you can take another photo.
The Self-Timer
You can include yourself in the photo by using this feature to delay the time between your pressing the shutter
and when the photo is actually taken. It is recommended that you use a tripod when you use the self timer.
1. Press the POWER/MENU button
repeatedly to select the icon shown on the LCD screen.
2. Make sure to press the shutter within 5 seconds. The timer lasts approximately 10 seconds before the photo
is taken.