Filter
Top Products
30
4. Press or to select the icon shown on the LCD.
5. Press FLASH/SET or
.
6. When you plug in the USB cable the Camera will be ready to download photos to the PC.
To put the Camera into Mode 2- Web Cam;
1. Press POWER/MENU
.
2. Press FLASH/SET or
.
3. Repeatedly press POWER/MENU
to select the icon shown on the LCD.
4. Press
or to select the icon shown on the LCD.
5. Press FLASH/SET or
.
6. When you plug in the USB cable the Camera will function as a Web Cam
NOTE: WHENEVER THE CAMERA IS TRUNED OFF THE CAMERA WILL AUTOMATICALLY RESET ITSELF
TO MODE 1- TRANSFER PHOTOS>
NOTE: YOU WILL STILL BE ABLE TO TAKE PHOTOS AND VIDEOS EVEN THOUGH THE CAMERA IS SET
TO MODE 2- WEB CAM.
Web Cam Quick Set
To put the Camera into Web Cam Mode when you start your camera;
Press and hold the shutter down and then while you are still holding the shutter, turn on the camera. Once you
hear the single BEEP you can let go of the shutter.