Filter
Top Products
- 25 -
• System Requirements:
At least a Pentium II 300 MHz, AMD Athlon 300 MHz, or a Celeron 400 MHz or higher, at least 128
MB of RAM. Please note that the older AMD K6 processors will not work. More information about
determining your computer's specifications can be found in the General Computer Information
section. If you have determined that you have pictures in your camera and you meet the system
requirements, follow the steps below to reinstall the software.
• Software Re-installation:
1. First install the software. Click on Start, Settings, Control Panel and Add/Remove
programs. You will need to remove PhoTags Express. After removing it, restart your
computer. If your camera is connected, disconnect it.
2. Now reinstall the software. Insert the CD that came with your camera. It should
automatically run the installation.
3. Restart the computer.
4. Once your computer is back up, plug the camera into your computer's USB port.
5. Right-click on the "My Computer" icon. Select Properties.
Click on hardware and then Device Manager.
If the camera is installed correctly, there will be a category listed for "Imaging Devices"
and clicking on the "+" next to it should reveal your camera. If not, you will likely see