Filter
Top Products
- 5 -
Preparing Your Camera for Use
Battery Installation
Your camera requires two AAA alkaline batteries, which must be inserted as follows:
1. Open the battery compartment on the bottom of the camera.
2. Insert the batteries in accordance with the polarity (+/-) shown on the inside of the
cover.
3. Close the battery compartment.
The LCD will flash if your batteries are running low in which case you will need to replace
the camera’s batteries before taking photos. When the battery voltage drops below 2.2V,
the LCD will display “Lo” and then automatically switch off.
Note: If you do not intend to use your camera for an extended period, remove the
batteries to avoid leakage and corrosion.
Warning:
• Please download any photos you have on the camera before opening the
battery compartment.
• Opening the battery compartment and/or removing the batteries will erase the
photos currently stored in the camera.
• Download your photos as often as possible. Photos may be lost when the
batteries run low.