Filter
Top Products
✤ Kamera je vybavena displejem z tekut˘ ch krystalÛ (LCD)
o velikosti 2,5 palce (63,5 mm), kter˘ umoÏÀuje pfiímé
sledování natáãení.
✤ V závislosti na podmínkách, ve kter˘ch kameru pouÏíváte
(napfiíklad uvnitfi nebo venku), mÛÏete nastavit:
■
Jas
■
Barvu
1. Pfiepnûte spínaã POWER do polohy
CAMERA nebo PLAYER.
2. Otevfiete LCD displej, LCD se zapne.
3. Stisknûte tlaãítko MENU ON/OFF.
4. Otáãejte koleãkem MENU DIAL tak, aby bylo
zv˘raznûno SE¤
Í
ZEN
Í
LCD.
5. Stisknûte ENTER ke vstupu do podmenu.
6. Otáãejte koleãkem MENU DIAL tak, aby byla
zv˘raznûna poloÏka menu, kterou chcete
nastavovat (JAS, BARVA).
7. Opûtovnû stisknûte ENTER.
■
LCD mÛÏete nastavit za poÏití
MENU DIAL.
8. Stisknûte ENTER.
■
K dal‰ímu nastavení opakujte kroky
6, 7, 8.
9. Stisknûte tlaãítko MENU ON/OFF k ukonãení
nastavení.
PouÏijte regulaãní knoflík VIEWFINDER k zaostfiení obrazu
(viz obrázek).
29
CZECHENGLISH
Basic Recording
Adjusting the LCD
✤ Your camcorder is equipped with a 2.5 inch colour Liquid Crystal
Display(LCD) screen, which enables you to view
what you are recording or playing back directly.
✤ Depending on the conditions in which you are using the camcorder
(indoors or outdoors for example), you can adjust ;
■
Brightness
■
Colour
1. Set the POWER switch to CAMERA or PLAYER position.
2. Open the LCD screen, the LCD switches on.
3. Press the MENU ON/OFF button.
4. Turn the MENU DIAL so that LCD ADJUST is highlighted.
5. Press ENTER to enter the sub-menu.
6. Turn the MENU DIAL so that it highlights
the menu item you want to adjust
(BRIGHT, COLOUR).
7. Press ENTER again.
■
You can adjust the LCD using the MENU
DIAL.
8. Press ENTER.
■
For further adjustment, repeat steps 6, 7,
8.
9. Press the MENU ON/OFF button to finish the setting.
Adjusting the Focus
Use the focus adjustment knob of the VIEWFINDER to focus the
picture. (refer to figure )
Using the VIEWFINDER
ENTER
MENU
ON/OFF
DISPLAY
(MENU) SP STBY
LCD ADJUST
CUSTOM SET
DIS............................OFF
PIP............................OFF
D.ZOOM ...................OFF
PROGRAM AE.........AUTO
: MENU
●
LCD ADJUST
●
SP STBY
BRIGHT I–00 18 36–I
COLOUR
RETURN
: MENU
Nastaven’ LCD
Z‡kladn’ nat‡‹en’
Pouìit’ hled‡‹ku
Nastavení ohniska