Filter
Top Products
24
❚
MOTION DET
[MOTION DET] menu is used to configure the motion detection related
settings. If you press the SETUP switch when [ON…] is selected in the
[MOTION DET] menu, the corresponding screen appears.
You cannot change the setting for type 2 because it is prefixed with the
full screen. In case of 1 and 3, you can set the motion detection area
on your own.
Those 3 types are like the following:
1. Window Type
The selected area is displayed with a box. The motion can be
detected for the area only. You can manually set the motion
detection area. You can use the Up/Down/Left/Right SETUP
switch to set the size. To move to [POSITION], press the SETUP
switch. After setting the position using the Up/Down/Left/Right
SETUP switch, press the SETUP switch to move to the upper
menu. To set the size and position for [AREA], select any of 0, 1,
2, and 3.
CAMERA ID OFF
IRIS ALC...
SHUTTER OFF
AGC HIGH
WHITE BAL ATW2
FOCUS MODE AF
MOTION DET ON...
DAY/NIGHT DAY...
PRIVACY OFF
SPECIAL ...
PRESET ...
EXIT QUIT
(MOTION DET)
TYPE 1
AREA 0* 1* 2* 3*
DISPLAY ON
SENSITIVITY L – – – I – – – H
RET
SCC-C4333_Eng-EURO.indd 24 2007-11-12 오전 10:18:26