Filter
Top Products
32
FLICKERLESS
When this is set to [ON], the shutter speed is set to 1/100 sec (for
NTSC) or 1/120 sec (for PAL) to prevent from flickering by the
discordance between vertical synchronization frequency and
on-and-off frequency of the light.
REVERSE
It is used to mirror video signals horizontally, vertically, or both.
DETAIL
It is used to control the horizontal or vertical distinction.
Y-LEVEL
It is used to set the levels for the Sync signal and the entire brightness
signal of the video signal.
C-LEVEL
It is used to set the levels for the Burst signal and the entire colour
signal of the video signal.
POSI/NEGA
It is used to output as it is, or mirror the video brightness signal.
RS-485
If you press the SETUP switch when [...] is selected in the [RS-485]
menu, the corresponding screen appears.
You can set the PROTOCOL, BAUD RATE, and ADDRESS (range: 0
to 255) for this communication.
(SPECIAL)
LANGUAGE ENGLISH
VIDEO SET ...
RS-485 ...
ZOOM SPEED 4
DIGITAL ZOOM OFF
DISPLAY ZOOM OFF
SYSTEM INFO ...
CTRL TYPE A
V-SYNC INT
RET
(RS-485)
PROTOCOL SAMSUNG
BAUD RATE 9600
ADDRESS 0
RET
SCC-C4333_Eng-EURO.indd 32 2007-11-12 오전 10:18:28