Filter
Top Products
18
ENG
19
❚
Installation precautions
1. Make sure that the installation site can sufciently support a minimum of four times the net
weight of the SCC-C6435(P)/6433(P) SmartDome camera and other accessories.
2. Install in an area where the space above the ceiling board is over 18 cm (7 in.) high.
3. Use the supplied screws to fasten the camera to the bracket assembly.
4. Keep persons away from the installation area, as there is a risk of falling objects.
Also, move valuables to a safe location before installation.
❚
Separately sold products for installation
Depending on the installation site, it may be convenient to use one of the following products.
1. CEILING MOUNT BRACKET (
SADT-101EC)
This bracket is used for installing the SmartDome camera in the plenum above the drop
ceiling.