Filter
Top Products
60
ENG
61
POSITION SET
The menu [POSITION SET …] sets the Start / End position of AUTO PAN. Return to the
settings screen and set the desired START position for PAN/TILT, and then press the ENTER
key. And, set the END position for the PAN/TILT. Press the ENTER key to nish the setup for
AUTO PAN Start/End positions.
DIRECTION
This sets up the movement direction of the START to END location (PAN location standard)
ENDLESS
This is a 360-degree rotation function that stops for the DWELL TIME only in the START and
END positions without running between the START and END positions. It can be set to [ON] or
[OFF].
SPEED
This is a setting function for movement speed setup. It can be set from STEP1 to STEP64.
DWELL TIME
This is a function for setting up the time to stay in the START and END position.
It can be individually set to 1-59 sec or 1-60 min.
<RIGHT> <LEFT>
START START
END END