Samsung SMM-15FDQ Security Camera User Manual


 
23
6. Adjust the direction of the lens.
1) Use the cross (+) screw driver to turn the screw (indicated by the arrow in the illustration)
counterclockwise slightly. The lens body will move.
2) Tilt the lens body down about 10° from the horizontal, and then turn the screw clockwise to fasten it.
7. Assemble the assy-case front onto the case-rear as shown in the illustration. Fasten the assy-case
front to the case-rear with the screw (BH M2.6) you removed earlier.
Screw (HB M4 x L8)
CASE-REAR
Screw (BH M2.6)
ASSY-CASE FRONT
SMM-15FDQ/21FDQ_ENG 9/19/03 4:50 PM Page 23