Filter
Top Products
ENGLISH
112
USB Interface (VP-DC173(i)/DC175WB/DC175W(i)/DC575WB/DC575Wi only)
Connecting to a PC
1. Connect a USB cable to the USB jack on the PC.
2. Connect the other end of the USB cable into the USB
jack on the DVD Camcorder. (USB jack)
If a PC is connected to the DVD Camcorder with
a USB cable, only [Power] switch, [Mode] switch,
[Zoom] lever can be operated.
Disconnecting the USB Cable
After completing the data transmission, you must
disconnect the cable in the following way:
1. Select the removable disc icon and click the right mouse button to select “Eject”.
2. Select “Confirm” and disconnect the USB cable when the Windows Splash screen appears.
Notes
If you disconnect the USB cable from the PC or the DVD Camcorder while transferring, the data transmission will stop and
the data may be damaged.
If you connect the USB cable to a PC via a USB HUB or simultaneously connect the USB cable along with other USB
devices, the DVD Camcorder may not work properly. If this occurs, remove all USB devices from the PC and reconnect the
DVD Camcorder.
You should set the USB Connect to Computer to connect to a PC via USB cable.
page 109
AD68-01230G_UK_R2.indb 112 2007-07-09 ¿ÀÈÄ 1:59:55