Filter
Top Products
ENGLISH
116
Troubleshooting
Troubleshooting
Before contacting a Samsung authorized service centre, perform the following simple checks.
They may save you the time and expense of an unnecessary call.
Self Diagnosis Display in <Camera/Player> Modes
Display Blinking Informs that... Action
Slow The Battery Pack is almost discharged. Change to a charged one.
No disc! Slow There is no disc in DVD Camcorder. Insert a disc.
Disc full! Slow There is not enough memory to record. Change to a new disc.
Erase recorded image.
Bad Disc! Slow Inserted disc is not recognised by the
DVD Camcorder.
Eject and re-insert the disc.
Try another disc.
Format the disc. (DVD-RW/+RW)
Finalised disc! Slow The disc is finalised.
To record on a DVD-RW/+RW disc, unfinalise it
.
Cover is opened! Slow Cover is opened. Close the cover.
Recovering Data -
While recording, if the power is
suddenly turned off, the file writing is
not properly done. When you turn on
the power, you can see the message,
<Recovering Data>.
Don’t eject a disc when the disc detection is in progress
because the data recovery stops.
Follow the directions displayed on the screen with
taking care of the items below.
The data recovery completes within a few minutes
but sometimes it may take more time. Use the AC
adapter when recovering data. (Don’t turn off the
power when the data recovery is in progress. The
disc may have a damage.)
The data recovery may not be successful according
to the power down timing.
When recordings from the other DVD Camcorders
or recorders are present on the disc, the data
recovery may not be successful.
AD68-01230G_UK_R2.indb 116 2007-07-09 ¿ÀÈÄ 1:59:59