Filter
Top Products
37
ENGLISH
Initial Setting : Display Menu Setting
Displaying the Date/Time (Date/Time)
The Date/Time function works in Camera Mode/Player Mode/M.Cam Mode/M.Player Mode.
page 26
The date and time are automatically recorded on a special data area of the disc.
1. Set the
[Mode] switch to [DISC] or [CARD].
(VP-DC173(i)/DC175WB/DC175W(i)/DC575WB/DC575Wi only)
2. Set the
[Power] switch to [ (Camera)] or [ (Player)].
3. Press the
[MENU] button.
The menu list will appear.
4. Move the [Joystick] up or down to select <Display>, then press the [Joystick].
5. Move the
[Joystick] up or down to select <Date/Time>, then press the [Joystick].
6. Move the
[Joystick] up or down to select the Date/Time display type, then press the
[Joystick].
Date/Time display type: <Off>, <Date>, <Time>, <Date&Time>.
7. To exit, press the
[MENU] button.
Notes
The Date/Time will read 00:00 01.JAN.2007 in the following conditions.
- During playback of a blank section of a disc.
- If the disc was recorded before setting the Clock function in the DVD Camcorder.
- When the Lithium Battery becomes weak or dead.
Before you use the Date/Time function, you must set the clock.
page 30
4
Move
OK
Select
MENU
Exit
Camera Mode
►Display
LCD Bright
LCD Colour
Date/Time
TV Display
►Off
►On
Move
OK
Select
MENU
Exit
Off
Date
Time
Date&Time
Camera Mode
►Display
LCD Bright
LCD Colour
Date/Time
TV Display
6
AD68-01230G_UK_R2.indb 37 2007-07-09 ¿ÀÈÄ 1:57:13