Filter
Top Products
035
Self-timer ( ) / Right button
Motion Timer
Motion Icon & Self-timer lamp
Pressing the Shutter button after
setting the Motion Timer
Blink (1 second interval)
Detecting the subject’s
movement
Blink (0.25 second interval)
No movement is detected
Turn on and the image is taken after
2 seconds.
The Motion Timer fl ows are as follows. (Movie Clip mode excluded)
Selecting the Motion Timer
Pressing the Shutter button
Confi rming
the composition (Within 6 sec.)
*1
Starting the detection (Swing your
hands fully)
*2
Stopping the detection (Do not move)
Taking an image
(after 2 sec.)
*1: The camera detects the subject’s movement 6 seconds after pressing
the Shutter button, so confi rm the composition within 6 seconds.
*2: Move your body or hands fully.
In the following cases, the Motion Timer may not operate.
The focus distance is over 3m.
The exposure is too bright or
dark
In backlight conditions.
The movement is insignifi cant
The movement is detected
beyond the center part (50%)
of the sensor where the movement
is recognized.
If the camera doesn`t sense detect
any movement for 25 seconds, or
the camera doesn’t dectect stillness
after sensing movement.
00005
00005
<The detection range of
Motion Timer>