Filter
Top Products
041
This camera automatically adjusts the
exposure according to the ambient
lighting conditions.
You can also select the exposure value
by using the Fn button.
Compensating Exposure
1. Press the Fn button, and then use the Up/Down button to select the
exposure compensation ( ) icon. The exposure compensation menu
bar will appear as shown.
2. Use the Left/Right button to set the desired exposure compensation
factor.
3. Press the OK button or Fn button again. The value you set will be
saved and the Exposure Compensation setup mode will close. If
you change the exposure value, the exposure indicator (
) will be
displayed on the bottom of the LCD monitor.
A negative exposure compensation value reduces the exposure.
Note that a positive exposure compensation value increases the
exposure and the LCD monitor should appear white or you may not
get good pictures.
Fn button: Aperture ValueFn button: Exposure compensation
This mode will set the aperture value for
automatic exposure in manual mode.
Smaller aperture values make the object
sharp but blur the background. Larger
aperture values make both the object
and background sharp.
Setting up the Aperture Value
Press the Fn button, then press Up/Down button to set the desired Aperture
Value.
Fn button: Shutter Speed
This mode will set the shutter speed for
automatic exposure in manual mode.
High shutter speeds can capture a
moving object in a way that makes it
seem as if the object is not moving. Low
shutter speeds can capture a moving
object, giving it a dynamic feeling of
movement.
Setting up the Shutter Speed
Press the Fn button, then press the Left/Right button to set the desired
Shutter Speed.
00005
00005
F 2.8
F 2.8
1/20
1/20
00005
00005
F 2.8
F 2.8
1/20
1/20
EV
-2 -1 0 1 2
0
Aperture Value
Shutter Speed