Filter
Top Products
《14》
Connecting to a Power Source
Using the battery
: If the camera does not turn on after you have inserted battery, please
check whether the battery are inserted with the correct polarity(+/-).
2. Insert the battery taking note of the polarity
(+ / -).
3. To close the battery chamber cover, push it until
it clicks.
Battery status
Battery indicator
The battery is fully
charged
Prepare new battery
There is no battery capacity.
Replace with new battery.
■There are 4 indicators for battery condition that are displayed on the LCD monitor.
Removing the battery
1. Turn off the camera power and open the battery
chamber cover.
2. Take out the battery and close the battery chamber
cover.
1. Open the battery chamber cover by pushing in
the direction of the arrow.
●When the battery chamber cover is opened, do not press the battery chamber cover by
force. This may cause the battery chamber cover modification or breakage.
INFORMATION