Filter
Top Products
4545
ENGLISH
MMiinniikkeett PPhhoottoo
NNTTSSCC // PPAALL
Miniket Photo 0
11..
SSeettttiinnggss
00
22.. [[PPOOWWEERR]] MMiinniikkeett PPhhoottoo00
33.. <<NNTTSSCC//PPAALL>>00
44..
((OOKK)) 00
◆
<<NNTTSSCC>>
NTSC 0
◆
<<PPAALL>>
PAL 0
146 0
55.. 00
[
]
✤ 0 NTSC
NTSC 0
✤
0
✤ 0
Miniket Photo 0
Miniket Photo PAL NTSC
0
Setting the Miniket Photo :
Setting the System
Setting the NTSC/PAL
You can set the Miniket Photo's output properly when playback on a
TV .
1. Turn the Mode Dial to the Settings mode.
2. Press the [POWER] button to turn on the Miniket Photo.
3. Select <NTSC/PAL> by moving the joystick
left / right.
4. Select the desired option by moving the joystick
up / down and then press the joystick (OK).
◆ <NTSC>: Sets to NTSC standard.
◆ <PAL>: Sets to PAL standard.
Refer to page 146
5. After you finish setting, turn the Mode Dial to
the desired mode.
[ Warning ]
✤ Recording and playback settings should be identical.
NTSC recordings are properly played back in NTSC
mode.
✤ If recording and playback settings are different, displayed video
may not be perfect.
✤ When using a TV, be sure to set the same output setting. Playback
on a TV is not available if the video format is different than that of
Miniket Photo. For example, Miniket Photo is set to PAL and the
TV video format is NTSC, then video playback on the TV is not
available.
4
Settings
NTSC/PAL
Move Select
SettingsSettings
NTSC/PALNTSC/PAL
MoveMove SelectSelect
3
SettingsSettings
NTSC/PAL
NTSC/PAL
MoveMove SelectSelect
Settings
NTSC/PAL
Move Select