Filter
Top Products
MAINTENANCE
Your camcorder is a product of superior design and craftsmanship and should be treated with
care.
The suggestions below will help you fulfill any warranty obligations and allow you to enjoy this
product for many years.
• For safekeeping of the camcorder, turn oft the camcorder.
Remove the battery and AC power adaptor. _-,pages 16, 20
Remove the memory card. _page 28
• Do not leave the camcorder in a place where the temperature is very high for a long
period of time:
The temperature inside a closed vehicle or trunk can become very high in a hot weather.
Ifyou leave the camcorder in such a place, itcould malfunction or the case could be
damaged. Do not expose the camcorder to a direct sunlight or place it near a heater.
• Do not store the camcorder in a place where the humidity is high or in a dusty place:
Dust entering the camcorder could cause a malfunction. If humidity is high, the lens could
become mouldy, and the camcorder could become inoperative. It is recommended that you
put the camcorder in a box together with a small silica bag when storing it in a closet, etc.
• Do not store the camcorder in a place subject to strong magnetism or intense
vibration:
This could cause malfunctions.
• Detach the battery from the camcorder and store it in a cool place:
Leaving the battery attached or storing it at a high temperature could shorten its life.
Before cleaning, turn off the camcorder and remove the battery and AC power adaptor.
• To clean the exterior
Wipe gently with a soft dry cloth. Do not apply excessive force when cleaning, gently rub
the surface.
Do not use benzene or thinner to clean the camcorder. The coating of exterior could peel
oft or the case could deteriorate.
• To fix the case the LCD screen
Wipe gently with a soft dry cloth. Be careful not to damage the monitor.
• To clean the lens
Use an optional air blower to blow out dirt and other small objects. Do not wipe the lens with
cloth or your fingers.
Ifnecessary, wipe gently with lens with a paper.
Mould may form if the lens is left dirty.
Ifthe lens looks dim, turn oft the camcorder and leave it for about 1 hour.