Filter
Top Products
USING THE intelli-studio PROGRAMME
Using the Intelli-studio programme built-in your camcorder, you can transfer video/photo files
onto your PC and edit them on your computer. Intelli-studio offers the most convenient way for
you to manage the video/photo files by using the simple USB cable connection between the
camcorder and your PC.
1. Set the "USB Connect: Mass Storage" and "PC Software: On."
• You will find the default menu settings are set as the above.
2. Connect the camcorder and the PC with the USB cable.
• A new file saving screen appears with the Intelli-studio main
window.
• According to your computer type, the corresponding
removable disk window appears.
3. Click "Yes," the uploading procedure will start. Click "Yes" to
confirm.
• If you do not want to save a new file, select "No."
To disconnect the USB cable
After completing the data transfer, make sure to disconnect the cable inthe following way:
1. Click the "Safely Remove Hardware icon" icon on the taskbar.
2. Select "USB Mass Storage Device," and then click "Stop."
3. Ifthe "Stop a Hardware device" window appears, click "OK."
4. Disconnect the USB cable from the camcorder and PC.
* Use the provided USB cable. (Supplied by Samsung)
* Dorft apply excessive force when inserting or extracting the USB cable into/from a USB jack,
* Insert a USB afler checking the direction of ks insertion is correct,
, We recommend using the AC power adaptor as the power supply instead of the battery.
, When the USB cable is connected, turning the camcorder on or off may cause the PC to
malfunction
* Ifyou disconnect the USB cable from the PC or the camcorder while transferring, the data
transmission will stop and the data may be damaged,
, Ifyou connect the USB cable to a PC via a USB HUB or simultaneously connect the USB cable
along with other USB devices, the camcorder may not work properly. If this occurs, remove all USB
devices from the PC and reconnect the camcorder,
, According to your computer type, the Intelli-studio programme may net automatically run, In this
case, ()pen the desired CD-ROM drive that has the Intelli-studio programme in My Computer and
run iStudie.exe,
, When an USB cable isconnected, according to the application programme (e,g, EmoDio) installed
on your computer, the correspendirlg programme may start first of all,