Filter
Top Products
troLAbe hootna
Adjusting the image during recording
Focus does not adJUSI
au[omatlcally
The image appears too bright or
flickering, or changes in colour
image s colour oalance is not
°'atural.
The SuDJeC[passing oy the frame
appears very quickly
• Set "Focus" to "Auto." _page 60
• The recording conditions are not suitable for auto focus. Adjust the
focus manually. _page 60
• The lens is dusty on the surface. Clear the lens and check the
focus.
• Recording is being made ina dark location.
Use a light to brighten the area.
This may occur when you make a recording under a fluorescent
sodium or or mercury lamp.
Cancel "_SCENE" to avoid or minimise this pherlomenon.
_page 53
White balance adjustment is required. Adjust to the proper "White
Balance." "-,page 56
This iscalled the focal plane phenomenon. This is not a
malfunction. Because of the way the image device (CMOS sensor)
reads out video signals, the subject passing by the frame rapidly
may appear to bend, depending on the recording condition.
PLayback on your camcorder
_! y , _',_,_ op;D'a"back 'pl_"/_'mJ_"_' _un_'+ion,,_ ddes " Image files recorded using another devk)e may not be played on
your camcorder.
not work.
• Check out the memory card compatibility. _page 29
Photo images stored on astorage • Photo images recorded on other device may not appear in the
media are nat displayed in the actual size. This is not an error.
actual size.
playback is interrupted " Check if the AC power adaptor or battery back is properly
unexpeotedly, connected and secure.